Slide Door System HARMONIJKA SPK Fold Door

Product information

Product name: Slide Door System HARMONIJKA SPK Fold Door

SKU: SE.SPK-301BF

Manufacturer information:

Seart Group sp. z o.o.
Kotlice 103, 26-020 Chmielnik, Poland
gpsr@seartgroup.com

Product safety information and instructions:

Installation and assembly

• Before starting installation work, it is recommended to consult the building contractor or local building authorities to ensure that the planned work complies with applicable regulations and building standards.
• To achieve the best results and full compliance with local building regulations, it is recommended to entrust installation work to qualified personnel who have the necessary knowledge of construction materials and building requirements. Installation should ideally be carried out by two people. This ensures proper planning and execution of work in line with safety standards and quality requirements.
• Please note that the wall where the system is to be installed must allow for drilling to a depth of at least 5 cm and be able to support the weight of both the sliding system and the attached doors. Installation on incomplete walls, such as plasterboard, is only possible with appropriate structural reinforcements and suitable anchors and accessories.
• The product is designed for sliding doors with a total weight not exceeding 110 kg; however, the door weight must always be adapted to the type and strength of the wall.
• Ensure that the doors to be installed with the product are made of solid construction material that allows for the required drilling and secure attachment. Inappropriate material, especially at mounting points, may lead to damage, instability, and safety risks.
• Before beginning installation, carefully check that no electrical wires, gas pipes, water pipes, wall or floor heating systems, or other infrastructure elements are located where drilling will take place. For safety reasons, it is recommended to use protective goggles and clothing.
• It is recommended to purchase and install a soft closer for the product, which slows down the sliding process. This increases user comfort and safety by preventing sudden, uncontrolled door movements and pinching.
• Before starting installation work, protect the floor to minimize the risk of scratches and damage to both the floor and the product surface.
• Exercise caution when opening packages to avoid accidental damage to the product.
• The set may include small mounting parts; beware of scratches and choking hazards for children and animals.
• Keep the packaging out of reach of children and animals. Protective foil may pose a suffocation hazard.
• The product should not be modified.

Usage guidelines

• Do not use the product in a way inconsistent with its intended purpose.
• Avoid sudden pulling, overly dynamic sliding, or overloading the mechanism during use.
• Never block the sliding mechanism or place obstacles on the sliding track. This creates a risk of the roller and door coming off the track, which may cause product damage or accidents.
• The product is intended for indoor use only. Do not expose it to weather conditions such as rain, snow, or excessive sunlight.
• Avoid contact with water and moisture, as this may lead to corrosion of steel and cast-iron elements.
• The product is not intended for use by children under 3 years of age or persons with reduced physical, sensory, or mental capabilities, unless under the supervision of a person responsible for their safety.
• Educate children on the importance of safe use of the product and make them aware that hanging, climbing, swinging, or repeatedly opening and closing may cause serious accidents, pose a threat to life and health, and damage the product. The product is not a toy.
• It is recommended to regularly check the technical condition of the product. If stability is lost or damage or deformation occurs, discontinue use.

Care and maintenance

• Check the product regularly for dirt, dust, and debris that may affect smooth movement.
• It is recommended to clean with a dry or slightly damp cotton cloth, avoiding excess water, strong cleaning agents, universal products, and abrasive sponges.

Disposal

• The product should be recycled at appropriate collection points for recyclable materials.
• Packaging materials such as foil or paper should be disposed of in accordance with waste separation rules. Paper should go into the paper container, and foil into the plastics container.
• Keep in mind that a product in good condition can be donated to charities or upcycled to give it a new, unique form.