Legs TYPU U

Product information

Product name: Legs TYPU U

SKU: RR.ST.U.PRGR

Manufacturer information:

Seart Group sp. z o.o.
Kotlice 103, 26-020 Chmielnik, Poland
gpsr@seartgroup.com

Product safety information and instructions:

Installation and assembly

• Exercise special caution when opening packages to avoid accidental damage to the product.
• It is recommended to choose the appropriate model and number of legs depending on the size, weight, and intended use of the element to which the product will be mounted. Failure to do so may affect the stability and durability of the product, cause damage, and pose a risk of accidents.
• Select the correct type and length of screws suitable for the surface on which the product will be mounted to ensure a stable and durable connection.
• The set may contain small assembly parts; handle with care to avoid scratches and the risk of swallowing by children and animals.
• Keep the packaging out of the reach of children and animals. Protective foil may pose a suffocation hazard.
• Before starting assembly work, it is recommended to protect the floor to minimize the risk of scratches and damage to both the floor and the product surface.
• It is recommended that two people carry and assemble the product. Do not move the finished product, and carry it only without additional load, holding only the elements permanently connected to the whole. During assembly, it is recommended to use protective glasses and work clothing. Such measures increase safety, minimize the risk of accidents, and prevent potential damage to the product.
• It is recommended to use felt pads under the product to prevent scratches on the surface on which it will be placed.
• Check that the product is placed on an even surface and ensure proper leveling to guarantee stability, balance, and to avoid tilting, which may lead to damage or tipping over.
• The product should not be modified.

Usage guidelines

• Do not use the product in a way inconsistent with its intended purpose.
• The product is intended for indoor use only. Do not expose the product to weather conditions such as rain, snow, or excessive sunlight.
• The product should be used under optimal conditions, i.e. temperature 18–24°C and air humidity 50–65%. Values below or above this range may cause cracking, swelling, and deformation of wooden surfaces, as well as corrosion of metal elements.
• Keep away from fire and heat sources, as this may damage the product, cause burns, or even pose a fire hazard.
• Wooden products exposed to intense sunlight may develop discoloration, as wood naturally darkens under UV radiation and its grain becomes more pronounced.
• Products are not resistant to scratches, especially those caused by sharp clothing elements or animal claws.
• When using the finished product, avoid uneven weight distribution and dynamic, point loads. This may lead to loss of stability and pose a risk of accidents.
• The product is not intended for use by children under 3 years of age or persons with reduced physical, sensory, or mental capabilities, unless supervised by a person responsible for their safety.
• Children should be educated about the importance of safe use of the product and warned that standing, jumping, hanging, climbing, swinging, or stepping on the product may lead to serious accidents, pose a risk to life and health, and damage the product. Special caution should be exercised with products that a child could overturn or get trapped in.
• It is recommended to regularly check the technical condition of the product. If stability is lost, or damage or deformation occurs, discontinue use.

Care and maintenance

• It is recommended to clean with a dry or slightly damp cotton cloth, avoiding excess water, strong cleaning agents, multipurpose products, and abrasive sponges.
• When choosing care or maintenance agents, make sure they are suitable for the type of steel, wood, or finish. Apply the agent to a cloth, not directly onto the product surface. Regardless of the chosen product, test it on a small, inconspicuous area first to ensure it does not damage the product.
• When cleaning floors, avoid moisture accumulation under the products.

Disposal

• Products should be recycled at appropriate collection points for recyclable materials.
• Packaging materials such as foil or paper should be disposed of in accordance with waste separation rules. Paper should go into the dedicated paper container, and foil into the plastics container.
• Remember that a product in good condition can be donated to charity organizations or upcycled, giving it a new, unique form.