Shelves OFLIS OAK

Product information

Product name: Shelves OFLIS OAK

SKU: PK.O.PRGR

Manufacturer information:

Seart Group sp. z o.o.
Kotlice 103, 26-020 Chmielnik, Poland
gpsr@seartgroup.com

Product safety information and instructions:

Installation and assembly

• Be especially careful when opening packages to avoid accidental damage to the product.
• Keep the packaging out of reach of children and animals. Protective foil may pose a suffocation hazard.
• Due to the heavy weight of the product, it is recommended that carrying and installation be performed by two people. This increases safety, minimizes the risk of accidents, and prevents possible product damage.
• When fixing the product to the wall, carefully check that no electrical wires, gas, water, or heating pipes or other infrastructure elements run through the installation site. For safety, it is recommended to use protective glasses and clothing.
• Before wall mounting, check the stability of the walls or surfaces to which the product will be fixed. Ensure that plugs, screws, or other accessories are suitable for the wall type (e.g. drywall, concrete, wood) and adapted to the product weight and intended load.
• The product should not be modified or used in a way inconsistent with its intended purpose, except for drilling holes (e.g. installing legs or a shelf bracket). Make sure to distribute weight evenly on the product.

Usage guidelines

• Product intended for indoor use only. Do not expose to weather conditions such as rain, snow, or excessive sunlight.
• Keep away from fire and heat sources.
• Wooden products exposed to intense sunlight may develop discoloration, as UV radiation naturally darkens the wood and makes the grain more visible.
• Wooden products are not scratch-resistant, especially against sharp clothing elements or pet claws.
• When using the finished product, avoid uneven weight distribution and dynamic, point loads. This may lead to loss of stability and pose a risk of accidents.
• The product should be used under optimal residential conditions: temperature 18-24°C and air humidity 50-65%. Values outside this range may cause cracking, swelling, and deformation of wooden surfaces.
• Do not leave spilled liquids on the product or expose it to prolonged water contact, as this may cause damage. Avoid aggressive cleaning agents and placing hot objects (e.g. cups, pots) directly on the surface.
• Do not cut directly on the product, as this may damage the surface. Always use appropriate accessories such as a cutting board.
• In rooms with elderly people, children, or people with disabilities, special attention should be paid to securing the product, especially its edges.
• Educate children on the importance of safe use of the product and explain that standing, jumping, climbing, or hanging on it is dangerous, may damage the product, and lead to serious accidents.
• It is recommended to regularly check the stability of fittings and the technical condition of the product to prevent damage and possible accidents.

Care and maintenance

• Clean with a dry or slightly damp cotton cloth.
• Avoid using large amounts of water, strong cleaning agents, universal cleaning products, or rough sponges.
• If using care or maintenance products, ensure they are suitable for the type of wood or finish. Apply the product to a cloth, not directly onto the surface. Regardless of the product chosen, test it first on a small, inconspicuous area to make sure it will not damage the product.

Disposal

• Dispose of products in accordance with bulky waste regulations.
• Dispose of packaging materials such as foil or paper in compliance with waste separation rules. Paper should go into dedicated paper containers, foil into plastic containers.
• Remember that products in good condition can be donated to charities or upcycled into a new, unique form.