Shelf support 150x150 mm KRATKA NATURAL

Product information

Product name: Shelf support 150x150 mm KRATKA NATURAL

SKU: D165

Manufacturer information:

Seart Group sp. z o.o.
Kotlice 103, 26-020 Chmielnik, Poland
gpsr@seartgroup.com

Product safety information and instructions:

Installation and assembly

• Exercise caution when opening packages to avoid accidental damage to the product.
• Depending on the length and depth of the shelf to be combined with the product, as well as the intended load, select an appropriate number of products to ensure safe use and reduce the risk of accidents.
• To ensure product stability and safe use, it is recommended that the product supports the shelf to a depth of no less than ¾ of the shelf’s depth.
• Before installation, check the stability of the walls or surfaces to which the product will be mounted. Ensure that the mounting elements are suitable for the type of wall and adapted to the weight of the product and the planned load.
• Before starting installation, make sure that no electrical wires, gas, water, or heating installations, or other infrastructure elements are located in the drilling area. For safety, it is recommended to use protective goggles and clothing.
• Before beginning assembly work, secure the surroundings to minimize the risk of scratches and damage.
• When mounting multiple products to support one shelf, make sure they are installed at the same height and properly leveled.
• Ensure that the shelf to be attached to the product is made of solid material that allows drilling and connections. Inadequate material may cause damage, instability, and affect safety of use.
• The set includes screws for connecting the product to a wooden shelf, but you must verify that their length is appropriate for the shelf. Too short screws pose a stability risk, while too long screws may damage the shelf. Mounting elements for attaching the product to the wall must be purchased separately, selected according to the type of surface and planned load.
• The packaging contains small elements; beware of scratches, cuts, and the risk of swallowing by children and pets.
• Keep the packaging out of reach of children and pets. Protective foil may pose a suffocation hazard.
• The product should not be modified.

Usage guidelines

• Do not use the product in a way inconsistent with its intended purpose.
• The product is intended for indoor use only.
• Avoid contact with water and moisture, as this may cause corrosion of steel and cast iron elements.
• Protruding parts of the product, especially in narrow passages or high-traffic areas, may catch on clothing or the body, posing a risk of cuts, abrasions, or injuries.
• The product is not intended for children under 3 years of age or for persons with reduced physical, sensory, or mental capabilities unless supervised by someone responsible for their safety.
• Children should be educated on safe use, and informed that hanging, climbing, or swinging may cause serious accidents, pose a risk to life and health, and damage the product. The product is not a toy.
• It is recommended to regularly check the product and its mounting. In case of instability or damage, discontinue use.

Care and maintenance

• For daily cleaning, use a dry cotton cloth.
• Before first use of raw metal products, wipe off excess protective wax with a cotton cloth (e.g. moistened with warm water and dish soap), then protect with clear metal lacquer to help prevent dirt and corrosion.

Disposal

• Products should be recycled at appropriate collection points for recyclable materials.
• Packaging materials such as foil and paper should be disposed of according to waste separation rules. Paper should go to the paper container, foil to the plastics container.